The Top Ghost Immobiliser Problems That Gurus Use 3 Things > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discrete and does not require additional key fobs to operate.

The device uses buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be altered up to 20 times. This will then allow the startup of your vehicle.

Simple PIN Code Change Process

With the growing rate of vehicle theft, a lot of owners are looking to improve their security. There are a variety of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. While a tracking system can assist you in locating your car in the event of theft, it will not stop the crime from occurring in the first place. Immobilisers, in contrast perform exactly as they say on the label - they shut off your car's engine so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your vehicle.

The ghost device utilizes the buttons on your car to create an unique sequence that needs to be entered in order for the engine to start. This can be done via the indicator stalk, window or heater buttons. In addition to this it is possible to use an app on mobile that acts as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This option is particularly useful if you need to hand your car over to a valet service or parking, as the immobiliser will remain activated and not disabled.

The Ghost is an unique and innovative device that operates with your vehicle's buttons rather than as a standalone unit. This means it's not only a highly effective protection against theft of your vehicle, but can also be transferred onto any other vehicles you own, making it more valuable than a traditional steering wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is a high-tech security device that shields your car from key hacking and cloning. It also prevents ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which is a common technique used by thieves to get around the immobilisers in place.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technology and cannot be detected by traditional diagnostic tools. The Autowatch Audi Rs6 Ghost Installer doesn't use LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, centre console, or door panels, to create a a unique disarming sequence. You can create a sequence that is up to 20 presses long to provide additional security. The iPhone app only allows one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is secured.

The ghost immobiliser fitter prevents car thieves adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run if the correct PIN code is entered. It is also possible to put it into valet/service mode for a temporary operation (with set parameters such as 30mph speed limit) so that you can give your car to a valet service or to be serviced without needing to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts signals to stop your car from starting up normally until you enter a customized code. The system can be activated or deactivated through your smartphone's app, without the need for extra wires.

The standard factory immobilisers function by using a transponder, which is integrated into the key. It transmits a message to the ECU. The car will start if the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser will not recognize it. This allows the vehicle start and be stolen. The Ghost immobiliser was created by a South African company at the forefront of vehicle security systems technology. It safeguards your vehicle from key cloning, hacking and even key theft. Only by physically towing your car away can thieves get it, and they would still not be able to drive the vehicle.

Ghost makes use of the buttons on your vehicle including the indicator stalk, steering wheel and door panels to generate an individual, changeable PIN code sequence that must be entered prior to you are able to use your car. This is done without any additional hardware, like key fobs. It can take up to 20 presses. It is also undetectable to diagnostics equipment and doesn't transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanning or code grabbing technology to determine if security systems have been installed.

Ghost is harder to remove than car alarms, which require disarming using the buttons. This makes it an excellent complement to a GPS tracking device, which can be used to track your vehicle after it's been taken.

Emergency PIN code override

You don't have to look far on social media to find stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices as well as hacking tools that allow them to start the car without your original keys.

The ghost immobiliser 2 immobiliser was designed to stop this, and give you an additional layer of security to keep your vehicle from being targeted by thieves. It creates an individual pin code by pressing the buttons on your steering wheel, door panel and centre console. This unique PIN is entered in conjunction with your original key fob to stop the engine from starting. The unique override pin is found on a black plastic card that you receive following your installation. It is easy to remember since there are no LED indicators.

The device is hidden within the wiring of your vehicle and doesn't emit radio signals. Therefore, it cannot be detected by diagnostic software which can identify the security system you have installed. This makes it a fantastic alternative to a tracker.

Contrary to most security systems, which have an engine relay bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to block the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems but this must be specified prior to installing the device. They are also fully service/valet mode compatible and are a great alternative to a tracker if you are you have your car checked for an electrical fault at the dealership.

Service/Valet mode

In recent years, there has been a increase in vehicles being stolen with no owner's keys. It's now easier than ever to take your joy and pride with the availability of key cloning devices and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if you keys have been copied.

It directly communicates with your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent because it does not utilize radio frequencies or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also prevents you from adding an ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden in your car and can be accessible via buttons on your steering wheel, center console, and door panels. A unique and reversible PIN code sequence up to 20 digits has to be entered before you are able to start your car.

This is the very first aftermarket CAN bus immobiliser that has been designed. It will prevent your vehicle from being driven or started in the event that you do not enter a PIN number first. If you are driving away with the device armed, an indicator will appear on your dashboard that will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate just as normal. If you don't enter your PIN code at this time the indication will continue to flash and will require a new PIN code for every attempt to start your car.