How To Tell The Good And Bad About Subaru Car Keys > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an automotive locksmith or a Subaru dealer, based on how old your Subaru is. This is accomplished by connecting a computer programming machine to your car.

To program your Subaru, start by unlocking the driver's door using the door button control, and then close it. You will hear the chime sound and see the dome lights flash in the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are many ways to program your key fob. First, you need to determine the type of key fob that you own. This can be done by looking at the shape of the key fob, or by listening for a buzz in your car.

Once you have the details, you can begin the process of programming your keyfob home. You'll need an flathead and a steel key to complete this. You can open the key fob by twisting it. The key is inserted into the case, and then let go of the battery by pressing the tabs holding it in place. Replace the battery with a fresh one, and then put the key fob case back together.

Step 2 2. Unscrew the Key Fob Case

It is a good idea to change the battery of key fobs if they're not working. In some cases, the buttons on the key fob could be damaged. If you notice that the contacts made of metal on the button have become loose, try soldering them in place to allow them to function once more.

Before you start the process, make sure the doors of your vehicle are closed and the ignition is turned off. You can do this by closing your driver's door and pressing your door button ten times in quick succession. Then, you should hear the instrument panel chime and your dome lights will flash. This means you're prepared to move forward.

Step 3: Put the Key Fob in the ignition

Many articles on the internet will teach you how to get replacement subaru key to program your new or Replacement Subaru key subaru immobilizer key programming keyfob at home. However, many of them don't offer specific instructions. A professional locksmith or auto dealer in Fort Bliss is the best solution for reprogramming your electronic car key.

Sit in the driver’s seat with all doors shut and the engine turned off. Use the door button control and use it to unlock all doors. Open and close the driver’s door three times. Then insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system should chirp to confirm that the settings have been altered.

Step 4 Step 4: Turn on the ignition

Before proceeding with this method of programming a key fob, it is crucial to know that this procedure only works if you own one working key already. If you don't then a dealership or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once the key is programmed, it will be able to start your vehicle within five seconds. Begin by closing the doors and then shutting off the engine. Sit in the driver's chair and unlock all the doors by pressing the door button. Insert the key in the ignition and turn it to the first position. The electrical systems will be activated, but the engine will remain in neutral. Repeat this procedure 10 times.

Step 5 5. Unlock the Door of the Driver's Door

Subaru provides a variety of premium vehicles with key fobs that lock and unlock doors, turn on the engine, and even defrost windows. However, sometimes, these devices do not function properly.

Contact a locksmith or a dealer to fix the problem. This will resolve the issue and make sure that your vehicle is secure.

To do this, you must open the door to the driver's side and close it. Place the key in the ignition, and turn it to position 1. Then, reverse it to the off position. Repeat this ten times in one row as fast as you can. After the tenth repetition, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock buttons on the driver's Door

The process of replacing subaru key the battery in a Subaru remote key fob is a breeze. First, open the exterior fob casing. Then make use of an flathead screwdriver, to pry open the internal case and then remove the battery.

After taking out the old battery, insert the new one and close the case. Assume a seat in the driver's chair and unlock all doors using the door button control. Finally, insert the key in the ignition and turn it to ensure that the electrical systems are switched on, but the engine is off. Repeat this 10 times in a line until you hear a chime on the instrument panel. This will put the system into programming mode.

Step 7: Press the Lock/Unlock Button on the Passenger's Door

For certain owners, the irritating noise that occurs when locking and unlocking the Subaru key fob from outside the vehicle may be distracting. In certain situations you can turn off the sound by shutting and opening all doors while double-clicking lock button on your key fob.

Switch off the ignition and shut all doors as well as the lid that holds the fuel. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a chime after this is done. The chime signals that the fuel-filler lid and door are locked. The setting can also be altered to ensure that the doors and lids for the fuel-filler are locked keys in subaru forester automatically, without pressing the request switch.

Step 8: Enter the 8-Digit Transmission Number

Remember the first 8 digits in your head. Now, get into the driver's seat, shut the doors and turn the key in the first position. After ten turns, your instrument panel should chime once.

The circuit board that controls the transmitter is located within the key fob case. There should be one or two sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. For older models, this process may require a visit to the dealer.