14 Common Misconceptions Concerning Repairing Window > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Tips For Repairing Window

Many windows may require repairs to ensure they are able to open and close properly. Repairing your window could save you money if the seal is broken, which results in your energy costs to increase, or your home to feel chilly.

You can fix hinges that are stiff with a ratchet that will remove the cover on the operator's device or a bit of oil. Repairing a damaged window is also feasible for a DIYer.

Broken or cracked glass

It's important to fix the issue as soon as possible when windows are cracked or has broken glass. The crack may get worse if it's left unattended and may cause airflow issues within your home. If you're not comfortable working on the fix yourself, a professional can assist.

Depending on the degree of the crack, there are several different ways to repair it. The simplest solution is to cover the crack with clear tape. This will prevent your family from getting cut by glass shards while still allowing air and sunlight to flow through the space. You can go a step further and use epoxy. This is a labor-intensive process however it can also provide an attractive finish.

The first step is to clean the area around the crack. Dip a cotton rag into a mixture of water and soap and then gently scrub the crack. When the window is dry then apply the epoxy according to package instructions. Once the epoxy is hardened, use a putty blade to remove any excess, and smooth the surface.

The most common type is the stress crack. They typically begin near the edges of the glass and extend through the pane. They are typically caused by changes in temperature in your house, and they can become worse over time.

For double glazed window repairs-pane windows you'll have to replace the entire unit in the event that one pane breaks. This is due to the fact that these windows are a sealed unit that consists of two glass pieces that function as one. This is not like regular windows that can be replaced by a new frame.

To replace a pane of glass in a double-pane windows, you'll need to take off the glazing clips or points that keep the window in place. If you're replacing a broken pane, ensure you keep track of these pieces to be able to replace them in the future. For windows of other types you'll need scrape away the old putty and then reapply it with the new pane.

Stained Glass

The tiny pieces of glass used in the production of stained glass windows are fragile and brittle. The rough treatment, the impact of hard objects, or a sudden change in temperature could cause cracks and break the glass.

The good news is that if the piece of glass is broken, it may be repairable and can be free from the expense of replacing the panel and removal. Stained glass experts can employ various techniques to repair the damage, such as re-leading or re-foiling, painting or soldering and putting in new glass.

It can be difficult and time-consuming to replace or repair broken stained glass. It is essential to employ a skilled professional who understands the various repair methods that are available and can pick the best one for your specific task. The reversibility, strength and visual impact of each repair method will vary, so each one must be assessed on a case-by case basis.

Re-leading is an effective method for repairing cracked leaded glass. A skilled craftsman will bend the soft ductile led, called came, back into shape to accommodate the crack. After the piece is bent, it is soldered into place and then cement is used to hold it in its place. Once the new cement has cured, the crack can then be cleaned, polished and sealed.

Another way to fix damaged leaded glass is by finding the crack and replacing the glass. This is a labor-intensive and costly process, however it can be successful. First the cracked piece of glass is removed and cleaned, then sanded to smooth the surface. The old lead is removed using a lead knife, or pincers. Any mold or oxidation can be removed using the lead knife. After the lead has been removed, the glass surface that was sanded is cleaned and the new lead is welded into the place.

A less expensive option for repairing stained glass that has sagged is to include reinforcing bars to the window. They are rebar-like support structures that run along the inner side of lead and connect to the frame to prevent it from sliding. The bars are often hidden behind foils with decorative designs, making them unnoticeable.

Muntins or Mullions

Those who know something about windows may have heard of the term "muntin." These vertical wood strips are used to separate panes of windows in traditional multi-pane windows. They are typically used in historic homes to preserve their authentic appearance and are sometimes required by city ordinances for building or renovating a historic district. Modern replacement windows mainly use muntins to enhance the appearance of the window, not for the strength and stability. However, they can get damaged and if they're damaged or rotting it is possible to replace them with fresh pieces.

Most window companies today don't even make the distinction between muntins and mullions since both serve the same purpose. These terms are usually interchangeable however, if you're replacing your windows it is crucial to know the distinctions so that you and your contractor can discuss the specifics of the work.

A mullion is a single vertical prop that holds panes of glass together in a multi-pane arrangement. It was needed prior to the advent in glass manufacturing technology because larger pieces were virtually impossible to make. Today's windows do not necessarily require mullions because the frames are constructed from two glass units that are glued to each other. Mullions are utilized in older windows to give support and are also used for aesthetic purposes.

If your mullions are showing signs of age, you can easily fix them by putting a dot or two of silicone on both sides of the muntin. Then press it into the frame. If you are replacing a horizontal piece it is possible to use a copingsaw remove the old muntin, and then shape the end of the new one using the help of a file. If you'd like to blend in, purchase an entirely new muntin that is slightly different from the original.

Certain IGUs contain both muntins (real mullions) and muntins (replicas) that are built in the unit solely for effect. If you are having issues with these components, it is likely time to replace your window.

Frame

If you need to touch up the frame, you can use a sanding pad with a fine grit. This will eliminate any old paint or stains. Clean it again, using a dry cloth, [empty] and pay particular attention to the corners of the mitered joints. If they've opened a bit and you are unable to close them, try closing them with a gentle touch, and then apply wood glue to keep them back together. You can also make use of vinegar to dissolve old glue in these areas, however you might need to test it on one or two corners before applying it to the entire area.

If the loose corners are a problem, you can usually disassemble the whole frame to access them, and then follow the steps 3-8 to fix the problem. However, if the separation is only on one side, you may be able to wiggle the joint open a little without disassembling it.

If the corners are utterly broken, you will need a small clamp, wood glue, and needle-nosed pliers. If only the top or bottom corners have broken away, you can often hammer finishing nails (those are tiny nails that are very similar to the size of the head) into the corner of the frame to ensure that it stays in place after the glue is dry. Be careful not to place the nails too close to the corner, as you could weaken it. You can also reinforce the corner with carpenter's glue and a hammer, or wood putty.