Windows Replacement: The Evolution Of Windows Replacement > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When it's Time for Window Replacement

It's time to replace your windows if they are no longer able to protect your home from the elements, block noise or enhance the architecture. Where do you begin?

There are a lot of things to take into consideration. We'll break down the various factors to help you decide: style, energy usage and labeling, cost installation, and cost.

Energy Efficiency

One of the main reasons homeowners invest in new windows is to save energy. In reality, replacing old drafty windows can cut heating and cooling costs by as much as 20 percent. However, some people are disappointed to find that the energy savings from the windows they have replaced do not cover the initial cost in a long time.

Window performance and operation should be the primary aspect for any homeowner thinking about window replacement. A window that isn't functioning properly could make it more difficult to maintain your home, increase costs for utilities, and the possibility of air infiltration or leaks. If your windows aren't moving up and down, or sliding side-toside as they should they should, you may have to replace them because the frames are swollen or warped from excessive moisture or the lack of sealing.

Mildew or mold that has developed on the outside and inside of the frame is a further sign that it's a good time to replace your windows. This usually indicates failed seals or damaged weather stripping. Mold and mildew that results from these issues may cause health and safety concerns for your family members if they aren't addressed immediately.

Replacement windows can also enhance your home's security as well as curb appeal and the value of resales. These advantages are enhanced if the windows used in a renovation project are energy efficient, as stated by the National Fenestration Rating Council (NFRC).

The U-factor is used to measure the energy efficiency of windows. The lower the U factor, the better the insulation power of the window. A U-factor that is less than 0.26 is a good guideline. Besides the U-factor, other aspects to consider when evaluating energy efficiency include frame material and design. Vinyl is durable and low-maintenance but it can contract and expand when temperatures change. This could lead to leaks. Wood is classic and provides better insulation however, it requires regular maintenance. Aluminum is lightweight, easy to maintain, and is able to conduct heat quickly.

For the best results homeowners should consult a professional window installation contractor to ensure that their replacement windows are installed correctly. A professional can also help you select the appropriate windows for your home's architectural style and climate zone, and provide information regarding resales value and homeowner satisfaction.

Style

It's not a secret that windows are a significant part of the value of a house. However, once you start looking at the styles, types and configurations available, it's overwhelming. The decision isn't just about style or function -- choosing the wrong windows could detract from a home's resale value.

Window companies have a number of ways to replace old windows with more energy-efficient windows, based on the condition of the existing frames. One of them is a pocket replacement windows panes, where a contractor removes the frame's exterior, but leaves the interior trim and sashes. Another option, which is often recommended for older homes or historical areas that have strict grille requirements, is a sash pack replacement. These are kits that include jamb liners made of wood or aluminum, and replacement sash on both lower and upper halves.

Installing full-frame replacements requires removing the frame and sash. This is often recommended when the current windows are damaged to the point that they're beyond repair. Full frame installations are also recommended for homeowners who wish to change the type of window, such as by replacing double-hungs with sliders or cases.

Look for replacement windows that have the NFRC label. This label indicates the energy efficiency rating of the window. The higher the rating the more efficient the window is in energy use.

Take out the stops that keep your glass window replacement near me in place prior to installing the new window. Work with care around the sill to avoid damaging the wood. If necessary you need to make sure the frame is shimmed. Once the window has been installed then shim the top and bottom edge to ensure a tight fitting. Apply caulk to the outside edge of the window sash replacement to seal it.

Fill any gaps greater than 0.64 cm (0.24 in) with foam-rubber backing rod. This is a much better option than caulk which can trap moisture, causing mold and wood rot. If you have gaps wider than this, you can screw 1 inch (2.5 cm) furring strips to the sides of your existing frame to increase the height.

Budget

The initial cost of window replacement is high but it's worth it for the energy savings it offers and the increased comfort it provides to your home. It can also boost the value of your house and cut down on utility bills. Before you start your project, you need to make a budget that will guide your spending decisions. Think about your family's needs for energy and the type of windows you would like to install. A reliable contractor can give you an insight into the cost of your windows beyond your personal goals and give suggestions to minimize them.

Window frame materials are one of the major factors that determine replacement windows cost. Vinyl and aluminum frames are the cheapest alternatives, whereas wood and composite frames cost more. Take a look at the advantages and disadvantages of each type of frame to help you decide which is best for your home. For instance, windows made of wood are more durable and offer superior insulation, but they're susceptible to moisture damage and require regular maintenance. Aluminum and vinyl are less expensive but they are more susceptible to rusting, and do not provide the same level insulation as wood.

The window replacement company you choose to work with will offer a variety of installation techniques that impact the overall costs. The most labor-intensive option is a complete frame replacement. This involves taking down the entire window and replacing it with a brand new one. This method is typically advised when the frames are damaged or rotted and is often necessary for historic renovation projects. Insert windows is a cheaper option. In this process, the existing operating hardware and sash are removed, but the exterior trim and siding remain intact. The new window unit is then inserted into the opening, then insulated and sealed.

When you do the work yourself, you should take into account the cost of the tools. A caulk gun, shims that are waterproof and tape measure are all essential. Buy shims of various thicknesses for your window sills head jambs, and other sizes. You'll need elastomeric sealant fill in any gaps between the casing and frame.

Installation

Windows are available in a variety of sizes and shapes to fit the unique design of each home. The options include double-hung, single-hung, sliding, bay bow, casement, circle garden, awning, egress and jalousie windows. These windows are available in many different materials and finishes. Some are also insulated to increase energy efficiency.

Replace your old windows that are inefficient with energy-efficient double-hung window to save money. The procedure is simple and it's well worth the effort. In addition to the cost savings you'll also get the benefits of a brand new, beautiful window.

Take off the screen and sash before installing your new window. This will make it easier to move the frame around and protect the materials. After the window is moved into position it is necessary to apply caulk around the frame's edges and in the gap if any, using the recommended caulk for doors and windows.

You can choose to use cedar or plastic shims, depending on your preference and the condition of the frame. This will ensure that the window is placed correctly in the opening. Be careful not to over-shim the window however, as this may cause water and condensation to build within the frame and cause damage to the material.

Your installer will ensure that the frame is level, straight and fully caulked after the window has been installed. You can then reinstall any trim inside that was removed to accommodate the new window replacement panes. Paint or stain the new window to be in keeping with the color scheme of your home. Seal and insulate your sill, jambs, and flanges on the exterior of your house for improved window performance.