Fitting Cat Flap in UPVC Door Panel > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to come and go at their own pace, without you needing to let him in or out. They also can help to keep your cat from having to go to the bathroom inside the house.

Installing a cat flap on the door panel made of upvc is a lot easier than a glass door, but it requires some knowledge and the proper tools.

Take a look at the Door

The installation of a cat flap inside a door can be tricky however, as long as you use the correct type of cat flap, take your time and follow the steps provided it should not prove to be too difficult. We will help you mark the shape and use an jigsaw to cut out the door's area. Then we'll complete the job by affixing the flap. This will ensure that the flap is in place and also protects the doors from the damage caused by rain and wind.

The first step is determine the width of your pet in order to determine an accurate estimate of the size of cat flap you will need. This will let you select a flap that is large enough to allow your pet to enter the house and leave without needing to open the door every time.

Once you have the measurements you can mark the location on the door where the template should be placed, usually, this is done using an X, but some kits include an illustration that outlines where to drill, if yours does then stick it to the door and draw a line around the door. If your door has moulding or a sill at the bottom, make sure that you leave enough space between your cat and these elements.

Then put on your eye protection and a dust mask. Then using a jigsaw, begin cutting according to the lines you have pencilled in, but don't press the blade too hard, as this could cause it to cut more quickly than you'd like it to. If you own a square that you have cut, use it to check whether you're cutting in the right way and to make sure the hole is in a rectangular shape. Once you are happy with this you can begin to remove the remaining door material.

Draw a Line

The cat flap lets you to let your pet go inside and outside without worrying about unwanted visitors or unwelcome gifts. It also stops draughts and helps to keep the temperature in your home in a stable manner. However, installing a cat flap in your door can seem like an overwhelming task for those who haven't done it before, leading many people to call a professional joiner or carpenter to do the job. This is an option but you can do it yourself if your tools are in order and the steps are followed.

This is much easier to accomplish on wooden doors, but it is still possible using uPVC. However you should be cautious not to scratch the doors since this could invalidate your guarantee. The first step is to take measurements of the door to ensure it will accommodate the new cat-flap. If you have an ordinary uPVC panel it should be a breeze. However when your door is made of composite or another kind of door, you may require more care.

The next step is to determine the size of your cat's belly. This is the height from the floor to the lower part of the cat's stomach and you will need to locate a place in the door where this measurement will fall within the range your pet can comfortably go through. Once you've got the information you'll be required to mark the space using a spirit level and a pencil, so that you are sure that the hole will be suitable for your cat Flap In Upvc Door panel.

Once you have marked out the area, it is time to cut the hole. You will need the jigsaw, and it is important that you be patient to ensure that the cuts are smooth and straight instead of rough and uneven, as this could damage your door. Wear safety glasses and a dust mask while working with the jigsaw. Inhaling sawdust is dangerous for your health. After you have finished cutting the hole, you'll require sandpaper for smoothing the edges so that the cat flap can be easily inserted into the hole.

Make a hole

Installing a cat flap into an existing door panel or double glazing sealed unit can be difficult. You might be tempted to tackle the task yourself, but unless have experience in DIY it is recommended to hire an expert to complete the job for you. A mistake could not only be ugly, but also pose an security risk. It could let cold air in when the cat is outdoors and hot air out when inside.

The first thing you have to do is draw the position of the hole in the door with a pencil and a spirit level, this will ensure that it is positioned and that it runs flush window with cat flap all other parts of the door. Make sure you have some sandpaper on hand to smooth any rough edges.

Wear the safety equipment you require when working with the power tool. If you're concerned about the noise, you can purchase a jigsaw with a cord that is quieter and more user-friendly.

It is best to only remove the material required to create the cat flap. It is essential to leave some extra material to make the wall thickness of the cat flap. However cutting away too much could cause issues or even damage the frame of the door.

A upvc door may have a metal frame or panel that could interfere with the microchip cat flap, and in this case you'll need to make an oversize hole to ensure the metal does not come into contact with the the cat flap. If this is the case, it is important to fill in the gap and make it watertight.

If you're installing a cat flap into the frame of a double glazed windows with a metal frame then you will need to speak to a professional who can supply you with a new pane of glass that already has the hole for the cat flap already drilled in it. This will be less expensive than fitting a cat flap in an existing pane of glass that was not made for this purpose.

Fit the Flap

Cat flaps give your pet the freedom to move around anytime they want and allow them to be comfortable at home whenever they want to. If you have a uPVC front door, it may be hard to install a cat flap. This is especially true in the event that you don't own glass panels that is cut. If you're willing to install a half-glazed upvc door panel replacement cat flap replacement upvc door panel with cat flap panel, it's possible to install a cat flap. It's not as easy as just making a hole in the door however, and there are some things you'll need to take care of first to ensure it's secure.

A composite, uPVC or GRP door panel is generally made up of a plastic skin which is bonded to an insulating polystyrene base. The material is quite fragile and care must be taken when cutting into it to avoid causing damage. This kind of door typically comes with a template drawing which you can use as a guide to cut the hole in your door.

After you have carved out the hole in your front door, it is time to install the cat flap. You can choose from a variety of models, ranging from simple push-button flaps to microchip-activated ones that only let your pet in. Whatever kind of cat flaps you choose it's essential that your cat can use the flap without getting stuck in bad weather.

It's a good idea select a circular fitting rather than one that is square, since circles are more securely cut into the door glass. This is because square holes make the glass more susceptible to cracking if drills are used on it. This is also a safer option since you don't have to drill into the toughened glass that could break and hurt your pet or family members. This is particularly important if you have child or elderly person in your home who may be hurt by shards of glass.