Guide To Ghost Immobiliser And Tracker: The Intermediate Guide On Ghost Immobiliser And Tracker > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost II Immobiliser Review

Autowatch Ghost is the latest technology in car security. It is inaccessible to thieves, and it is impossible for them to start the car without a specific pin code.

The system is based on your vehicle's CAN Data network and is silent and therefore cannot be detected by common thieves radio signals or diagnostic tools. It also does not require any circuit cuts to be made before installing.

What is a ghost immobiliser review immobiliser?

A ghost immobiliser price Immobiliser is an instrument that protects your car from theft by stopping the engine from running until you enter a unique pin code. It is a solution for various vehicles. And, unlike the standard vehicle immobiliser it doesn't require a fob or key to operate. It is also extremely difficult to hack or bypass and it operates in a quiet manner. This means that thieves will have to be quick to escape without being noticed.

It is protected from signal jamming, spoofing and key cloning, all of which that thieves have employed to gain access to cars with standard immobilisers. The device stops thieves from stealing keys through a search through your letterbox, or breaking into your home and taking the remote control. It will also stop them from stealing your pride and joy if they have managed to gain access to the key since it blocks them from starting the vehicle unless they enter an initial code.

A ghost immobiliser, unlike passive immobilisers that require a fob or key to be press to activate them, is designed to be completely sealed within the engine. It is directly connected to the data circuits of the CAN in the vehicle. The system generates a pin code when you press buttons on the steering wheel or console, or on the door panels of your car. You will have to enter this code before the engine is able to start. The system can be switched into the service mode, which allows your vehicle to start and drive for short periods without requiring a PIN code. However, the service mode will be terminated depending on speed and time.

Due to the technology used this device is not able to be bypassed or hacked, even with the use of advanced technology like code grabbing or RF scanning devices. It is also impossible for a standard immobiliser to turn off since the device does not send an alert like a standard vehicle immobiliser does, and only works when connected directly to the CAN circuit.

Because of its advanced technology and easy installation, the ghost immobiliser has been insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a proud TASSA approved Ghost installer and can install the device in your vehicle to be used for insurance purposes.

How does a Ghost Immobiliser work?

Immobilisers stop your car from starting if the wrong remote or key is used. This is achieved by sending a code to the vehicle's ECU (Engine Control Unit) If this code is sent through the wrong key or fob, the ECU will not recognize it, and consequently the car won't start. This is why it's vital to ensure your car is fitted with an immobiliser installed by an approved and reputable professional.

MotorGuard is the Midlands most trusted security expert for vehicles and installer. We provide Autowatch Ghost immobilisers for a variety of modern vehicles. You can rest assured that your car's security will be safe from theft.

The Autowatch ghost immobiliser and tracker is the first aftermarket CAN-bus immobiliser system in the world. It protects your vehicle from key-cloning and hacking as well as theft. It's designed to go undetected by thieves since it doesn't use LED indications or key fobs, and can be concealed within the wiring of your vehicle, so that no extra hardware is required.

Once installed the system is connected to the CAN system of your vehicle and allows you to design a an individual disarm sequence using your own PIN code, which you have to enter to allow you to drive the vehicle. This pin code is up to 20 presses long, for added security. If you forget your pin code or when the button is damaged, there is a secure emergency code that can be used. This will allow your vehicle to start over again.

The fact that the Ghost immobiliser is not able to be bypassed or hacked is what makes it such an effective deterrent against thieves. Additionally, it is also TASSA insurance approved (Tracking and Aftermarket Security Systems Association) which could lower the cost of your car insurance.

As technology advances Ghost immobilisers are getting more sophisticated. We suggest that you speak with an autowatch ghost 2 immobiliser Ghost fitter as fast as possible to protect your pride and joy. We will provide you with a high-quality service whether you are purchasing a brand new vehicle or upgrading your current vehicle.

Is Ghost Immobiliser compatible my car?

The Ghost is the first aftermarket CAN bus immobiliser that provides total protection against modern-day vehicle theft. It offers protection against key cloning and vehicle hacking, as well as ECU swapping. The new TASSA-certified Ghost-II system also allows marking of your vehicle, linking to the International Security Register and enabling your insurer to verify that you have an Ghost system installed.

Our Ghost Immobiliser prevents theft by making it necessary for a unique pin code is entered, or your smartphone to be equipped with our Autowatch app installed. It works like a PIN for a bank card and makes it impossible to drive away with your pride and joy without entering the correct pin or phone. Our Ghost Immobiliser System integrates into the CAN Data Network, so there is no need for wire cutting and it works quietly. It is inaccessible to thieves and cannot be detected by the sophisticated RF scanning and code grabbing technology that other systems employ.

Once the Ghost is fitted by our skilled fitters, it is completely concealed and inaccessible to the naked eye, it makes use of the buttons on your vehicle, for instance on the steering wheel, door panels & the center console to generate an individual pin code sequence that must be entered before the engine can begin to run, just like a password for your bank account. This is then connected to your smartphone using the Autowatch app, which allows you to enter the temporary "Service or Valet" mode that deactivates ghost for up 30 minutes while you hand over your vehicle for transportation or service.

With the apex of personalisation and modification employed in today's vehicles, along with the fact that most of us drive older vehicles, it's not surprising that the number of stolen vehicles has risen dramatically. It can take several months to replace these costly and rare vehicles after they have been stolen. Therefore it is crucial to safeguard your pride and joy from becoming the next victim. A Ghost immobiliser is a reasonable investment that will ensure that your vehicle is secure and even be used to retrieve it in the event that it is stolen.

Does a Ghost Immobiliser function on the cut principle?

Ghost immobilisers stop your car from being started until a PIN is entered along with your key fob. This prevents thieves from cloning keys to cars or hacking into your car's computer system. It can also help them leave the vehicle on its own.

Once fitted the ghost immobilise immobiliser, it will create a unique pin code that can be as long as 20 digits via the buttons in your vehicle (steering wheel or centre console, or door panels) which you must enter to start your vehicle. This code sequence is required each time you wish to drive your vehicle as a password or PIN on a bank card. The code can be reset by entering a sequence of numbers into the Ghost app on your smartphone.

The Autowatch Ghost II CAN immobiliser also has two deactivation modes for valet and service which allow you to temporarily start your vehicle without access code similar to a key fob - whilst it's in the garage, or with a valet parking company. The immobiliser then will be activated automatically when the car is in a parking spot.

The Ghost immobiliser and tracker is distinct from other security systems on the market. It doesn't come with any LED indicators, and it works completely silently using the CAN data network that is in your vehicle. It's also not susceptible to the same cuts in circuits that other security devices are since it doesn't use radio signals.

It is also able to be concealed and discretely installed, making it virtually impossible for thieves to locate. It is also not detected by advanced scanning tools and technology that grabs codes, which are often used to locate or disable security devices.

The Ghost is a premium modern CAN bus immobiliser that provides first-rate security against key cloning, relay theft, and car hacking. It is easy to install and is not detected by thieves. It cannot be disarmed with simple wire cutting. This makes it a must for any motorist who wants to safeguard their vehicle.