See What Ghost Immobiliser Problems Tricks The Celebs Are Making Use Of > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost 2 immobiliser Immobiliser

Guard your precious possessions against theft with the ghost vehicle immobiliser Immobiliser. It's discreet and does not require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be modified up to 20 times. This allows your vehicle to start.

Simple PIN code Change Process

With the growing rate of vehicle thefts, many owners are looking to improve their security. There are a myriad of security products that are available, from tracking systems to alarms and immobilisers. They're not all equally effective in protecting your vehicle. While a tracking system can assist you in locating your car in the case of theft, it does not prevent the crime from happening in the first instance. Immobilisers, on the other hand is exactly what says on the tin: it shuts down the engine of your car to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your car.

Using the existing buttons in your car, the ghost device creates a unique sequence which must be entered prior to the engine can start. This can be done by using the heater, window or indicator stalk buttons. Additionally it is possible to use an app on mobile that can act as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This option is particularly beneficial if you have to hand your car over for valet parking or maintenance because the immobiliser is active and not deactivated.

The Ghost is a truly unique and innovative device that works in conjunction with buttons of your car rather than being a standalone unit. This means that it is not just a highly effective protection against theft of your vehicle, but it can also be transferred to any future vehicles you may own, making it more investment-wise than a traditional steering wheel lock.

Small, weatherproof device

The autowatch ghost immobiliser cost ghost immobiliser is a high-tech security system that protects your vehicle from key cloning, hacking & ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU over the CAN data bus to disable the engine. It can be installed in the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices that are the most common method used by thieves to bypass existing immobilisers.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology, nor can it be identified by conventional diagnostic tools. The autowatch ghost immobiliser cost ghost doesn't emit LED indicators and instead uses the buttons on your vehicle like the steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can even make this sequence as long as 20 presses for added security. The iPhone app is limited to one connection, and comes with the Ghost's unique pairing code. the Ghost. All communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to run only if the correct pin code is entered. It is able to be operated temporarily in the Valet/Service mode (with parameters set such as a 30mph speed limit) and, therefore, you can give your car to an attendant or valet without entering the code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that is able to be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals that block your car's system from running its normal startup routine until you input an individual passcode. The system can be activated or deactivated by using your smartphone's application without the need for wires.

Standard factory immobilisers on vehicles work by having an electronic transponder in the key, which sends an indication to the ECU. The car will start when the correct code is transmitted. However, if a transponder of a different vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle start and be stolen. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It protects your pride and joy from key cloning, hacking and even key theft. Only by physically towing your vehicle away could a thief take it away and not be able to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk, steering wheel and door panels to generate a unique PIN code that is changeable that must be entered before you can use your car. This is done without the need for additional hardware like keys-fobs, and can be as long as 20 presses long. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing techniques to determine if the system has been set up.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is concealed within the vehicle, so it cannot be taken away or disabled by thieves and is more difficult to remove than a car alarm that requires disarming using a button sequence. This makes it an excellent complement to a GPS tracker which helps locate your car after it's been stolen.

Override of emergency PIN code

You don't have to look far on social media to find stories or videos of cars that have been stolen using the latest technology tools. This includes key-cloning and hacking devices that allow the vehicle to start without the original key fobs.

Our Ghost immobiliser combats this and gives you an additional layer of protection to stop your vehicle from being stolen when it how much is a ghost immobiliser targeted by thieves. It generates a unique pin code when pressing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN is entered along with the original key fob to stop the engine from starting. The unique override pin can be found on a black plastic card which you will receive following the installation. It is easy to remember since there are no LED indicators.

The device is hidden in the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected using diagnostic software which can identify the security system you have installed. This makes it a great alternative to a tracking device.

Contrary to most security systems that use a relay inside the engine bay, these CANBUS Immobilisers connect with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely through a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm or tracker with these systems, but this has to be specified prior to installing the device. They also work with valet and service modes, and are an excellent alternative to a tracker device when you bring your vehicle to the dealer for an electrical issue.

Service/Valet Mode

In recent years there has been an increase in vehicles being stolen without the owners keys. It's easier than ever to steal your pride and joy with the availability of key cloning tools and door lock picks. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys were cloned or your vehicle has been stolen.

It directly communicates with your car's ECU (Engine Control Unit), via the CAN data loop. It's completely silent since it doesn't use radio frequencies or keys fobs. This means that it can't be detected by diagnostics or any other car hacking devices. It also protects you from introducing the new ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden within your car and is accessible via buttons on your steering wheel, the centre console, and door panels. Before you can begin your car, you need to enter a unique, changeable PIN number that is up to 20 digits.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car being moved away or even started if a PIN code isn't entered before. If the device is armed and you attempt to drive away, it will display a warning on your dash which will flash on a regular basis for approximately 300m. If you enter your PIN code during this time, it will disable the anti-hijack system and your vehicle will continue to operate as normal. If you don't enter your PIN code at this point, the warning will keep flashing & will require a new PIN code every attempt to start your car.