This Is The One Ghost Immobiliser Problems Trick Every Person Should Be Able To > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

ghost vehicle immobiliser Immobiliser will protect your prized possession from theft. This system is discreet & doesn't require additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence that can be up to 20 presses. This will then allow the vehicle to start.

Simple change of PIN code

With the growing rate of vehicle theft, many owners are seeking to improve their security. There are many kinds of security products that are available for sale that range from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your vehicle. While a tracking system may help you find your vehicle in the case of theft, it can not stop the crime from occurring in the first instance. Immobilisers, in contrast are exactly what they say on the label - they disable your car's motor so that it isn't able to be started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves to steal your car.

The Ghost 2 immobiliser device makes use of the buttons on your car to generate a unique sequence that must be entered in order for the engine to begin. This can be accomplished by using the heater, window or indicator stalk buttons. In addition to this option, there is a mobile app which can act as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is especially beneficial if you have to give your car away to a valet service or parking because the immobiliser is activated and not disabled.

The Ghost is an innovative and unique device that operates with the buttons on your vehicle rather than as a standalone unit. This means that it is not only a highly effective security measure against theft from your vehicle but can also be transferred onto any other vehicles you own, making it much more valuable than traditional steering wheel locks.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security device that shields your pride & joy from key hacking and cloning. It also prevents ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU over the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for additional wiring, and has been thoroughly tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices which are a typical technique that car thieves use to get around immobilisers.

The benefit of using CAN data is that it operates silently compared to traditional systems. It isn't detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, centre console, or door panels, to create a unique disarming sequence. You can create a sequence that is as long as 20 presses to increase security. The iPhone app allows only one connection, with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also prevents thieves from stealing an additional key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run only if a valid PIN is entered. It is also possible to put it into Valet/Service mode for temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service or for servicing without the need to enter a pin code.

Every vehicle is tested

The Autowatch Ghost Installation ghost immobiliser installer is the first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals to disable your car's system from running its normal startup routine until you input an individual passcode. The system can be turned on or off by using your smartphone app without the need for additional wires.

Standard factory immobilisers in vehicles work by having a transponder inside the key that transmits an indication to the ECU. The car will start if the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser will not recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It shields your car from key cloning, hacking and even key theft. Only by physically towing your car away from thieves could they steal it and not be able drive it.

Ghost uses buttons on your vehicle, including the indicator stalk, steering wheel, as well as the door panels, to create unique PIN codes that needs to be entered in order to use your car. It does this without additional hardware, like key fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing technologies to detect that the system has been set up.

Ghost is more difficult to remove than car alarms, which require disarming with a series of buttons. This makes it an excellent complement to a GPS tracker which helps locate your vehicle after it has been taken.

Emergency PIN code override

You do not have to look long on social media sites to find stories or videos of vehicles that have been stolen with the most advanced technology tools. Key-cloning devices, for instance, and hacking tools that allow them to start the vehicle with the original keys.

The Ghost immobiliser was specifically designed to prevent this and offer an additional layer of security to prevent your vehicle from being targeted by thieves. It is created by creating an unique pin code push sequence from the buttons you have on the steering wheel, door panel, and the centre console. This unique PIN must be entered in conjunction with your original key fob in order to prevent the vehicle from getting started. The unique PIN for override is on the black card you will receive following your installation. It's easy to remember as there aren't any LEDs.

The device is hidden in the wiring of your vehicle and does not emit radio signals. This means it can't be detected using diagnostic software that can tell the type of security system you have installed. This makes it a fantastic alternative to an alarm.

Contrary to most security systems that have a relay inside the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This allows them to shut down a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, however this must be stated prior to the installation of the device. They are also fully service/valet-mode compatible and are a great alternative to a tracker if you are having your car in for repair at the dealer.

Service/Valet Mode

In recent times, there has seen an increase in the number of cars being stolen from owners without keys. With easy access to key cloning equipment & door lock pick sets it is now how much is a ghost immobiliser easier for thieves to steal your pride and joy. We've developed the Autowatch Ghost Immobiliser to combat this. It blocks your car from being driven, even if your keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequencies or key fobs. This means it cannot be detected by diagnostics or any other car hacking devices. It also shields against the possibility of adding a new key or replacing the ECU to get around the system as only the correct PIN code can allow the engine to start.

The device is hidden inside your car and is reached via the buttons on your steering wheel, center console, and door panels. A unique and reversible PIN code sequence of up to 20 digits has to be entered before you are able to start your car.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being started or driven away if a PIN code isn't entered first. If the device is activated and you try to drive away, it will display an indication on your dash, which will flash regularly for around 300m, if you enter your PIN code at this point, it will disarm the anti-hijack system and your vehicle will continue to operate as normal. If you do not enter your PIN code at this time the indication will continue to flash and require another PIN code for every attempt to start your car.