See What Ghost Immobiliser Problems Tricks The Celebs Are Using > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser problems Immobiliser. This system is discrete and does not require additional key fobs in order to operate.

The device uses existing buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence up to 20 presses long. This will then allow your vehicle to begin.

Simple process to change the PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a myriad of security devices that are sold aftermarket from tracking systems to immobilisers and alarms. Not all of them are equally effective at protecting your car. While a tracking system can assist you in locating your vehicle in the event of theft, it does not stop the crime from occurring in the first place. An immobiliser, on the contrary is exactly what says on the label: it shuts off your car's engine so that it cannot be started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your car.

Using the existing buttons in your car, the ghost 2 immobiliser installation device creates an exclusive sequence that has to be entered before the car's engine starts. This can be done using the indicator stalk, window or heater buttons. In addition, there is also an app for mobile devices that can function as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This is a great solution if you want to give your car to valet parking or for maintenance. The immobiliser remains active.

The Ghost is an unique and innovative device that operates with your vehicle's buttons rather than as a separate unit. This means it's not just a highly effective protection against theft of your vehicle, but can also be transferred over to any future cars you may own, making it how much is a ghost immobiliser more of an investment than traditional steering wheel locks.

Weatherproof small device

The Autowatch Ghost Immobiliser is an advanced security system that protects your vehicle from key cloning and hacking. It also blocks ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to stop the motor. It can be installed in the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices which is the most common method used by thieves to bypass the immobilisers in place.

The benefit of CAN data over conventional systems is that they operate in a silent manner. It isn't detected by sophisticated RF scanning and code-grabbing technologies, nor can it be recognized by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators but instead utilizes buttons on your vehicle, like the steering wheel, centre console, or doors, to create an unique sequence of disarming. The sequence can be extended by 20 or more presses for extra security. The iPhone app allows only one connection, and comes with the ghost immobiliser installer's unique pairing code. the Ghost. All communication between the two devices is secured.

The Ghost also stops car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only run when a valid PIN code is entered. It is also possible to put it into valet/service mode for a temporary operation (with set parameters such as 30mph speed limit) so that you can transfer your vehicle to a valet service for maintenance without having to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device detects electronic signals to disable your car's system from performing its normal start-up routine until you input the passcode you have created. The system can be turned off or on by using your smartphone app, without the need for additional wires.

The standard factory immobilisers function with a transponder which is embedded in the key. This sends a message to the ECU. If the correct code is sent the car will begin, but if a transponder is replaced with one from a different vehicle, the immobiliser cannot recognize it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology has developed the Ghost immobiliser. It shields your car from key cloning, hacking and even key theft. The only way that a burglar could take your car is by physically towing it away, and even then they wouldn't be able to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an individual PIN code that is changeable that must be entered prior to you are able to use your car. This is not required to use additional hardware, such as a key-fob and can be up to 20 presses long. It is also unrecognizable to diagnostics equipment and does not transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanning or code-grabbing technology to discover that a security system has been installed.

Ghost is more difficult to get rid of than car alarms, which require disarming using several buttons. This makes it a fantastic alternative to an GPS tracking device which can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You do not have to look far on social media to see stories or even videos of vehicles that have been stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow the vehicle to start without the original keys.

Our Ghost immobiliser is designed to combat this and offer an additional layer of security to keep your vehicle from being targeted by thieves. It creates an unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel and the center console. This unique PIN is entered alongside your original key fob to stop the engine from beginning. The unique PIN for override is on the black card you will receive after installation and is easy to remember since there are no LED indications.

The device is hidden within the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can tell what type of security systems you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Contrary to other security systems which use a relay in engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending the use of a digital block of commands to both the ECU and the engine.

They can also be linked to a separate alarm immobiliser, tracker or alarm. This should be specified prior to the installation. They are also service/valet mode-compatible and a good alternative to a tracker when you are taking your car in for an electrical fault at the dealer.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen with no owner's keys. It's more easy than ever to steal your pride & joy thanks to the availability of key cloning tools and door lock picks. To stop this, we now offer the Autowatch ghost immobiliser fitting near me immobiliser that prevents your car stolen with ghost immobiliser from being driven despite the fact that your keys were cloned or your vehicle was stolen.

It communicates directly with your car's ECU (Engine Control Unit), via the data loop called CAN. It's completely silent since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also stops you from introducing a new ECU or key to bypass the system, since only the PIN code allows the engine to start.

The device is hidden in your car and can be accessible via buttons on your steering wheel, center console and door panels. A unique and changeable PIN code sequence of up to 20 digits must be entered prior to being able to start your car.

This is the first aftermarket CAN-bus immobiliser for the market that was designed. It will stop your vehicle from being driven or started in the event that you do not enter a PIN code before entering. If the device is activated and you try to drive off it will display an indication on your dash which will flash on a regular basis for approximately 300m. If you enter your PIN code at this point, it will disable the anti-hijack system and your vehicle will continue to drive just as normal. If you do not enter your PIN code at this point, the warning will continue to flash and will require a new PIN code for every attempt to start your car.