See What Autowatch Ghost Immobiliser Fitting Tricks The Celebs Are Making Use Of > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Protect your pride & joy from car thieves by putting in a ghost immobiliser. Our TASSA verified system protects vehicles from hacking, key cloning and vehicle immobiliser bypass.

The system is hidden in the wiring loom of your vehicle It is inaccessible to anyone who is looking. It works by creating an e-pin code push sequence by using buttons already present on the steering wheel doors, door cards, and the central console.

No circuit cuts

It's not a surprise that people want to protect the vehicle they've spent so much money to purchase. However, traditional security systems such as wheel locks and alarms can easily be snatched away or jumped by thieves. Ghost immobilisers are a highly-effective solution that operates silently and isn't easily identified by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the dash, steering wheel and door panels. This creates a unique pincode that is only known by you. The code can be altered at any time and can contain up to 20 numbers based on your preference. It also comes with a safe emergency code you can use in case you forget your PIN.

The ghost immobiliser can also be beneficial to stop the relay box inside your home from transmitting the signal from your car key, which would open the doors and start your vehicle. It can also block advanced methods of stealing your vehicle, like OBD port hacking. The device is tiny, weatherproof and difficult to spot. It's also very difficult to alter.

Another advantage of the ghost immobiliser is that it can be installed to your vehicle without permanent marks. It is ideal for those who plan to sell their car in the near future. It's also quicker and simpler to install than an original factory-fitted system.

The Autowatch Ghost, a cutting-edge technology, is a new generation device that prevents contactless car thefts by connecting to the CAN network of a vehicle and using the buttons to generate an unique PIN code. This is a hidden device that can be set up without cutting any wires, and does not require additional key fobs. It can also be connected to the original ECU of the vehicle, preventing thieves by stealing it using a new key. This system has been verified by TASSA and can be linked with an International Security Register. Owners can rest assured, knowing that their vehicles are protected from theft.

No RF scanning

You'll want to secure your vehicle from theft if have spent an enormous amount of money and spent a lot of time customizing it. Installing an immobiliser is one of the best ways to prevent theft. It will prevent your vehicle from beginning until you enter a unique code. Utilizing the buttons on your steering wheel and dashboard, you can create an up to 20 digits long which is only known by you, ensuring that only you have access to your vehicle. It is also possible to set up a service and valet mode that allows you to start your car temporarily without entering the PIN code. This will allow your technician to work on your vehicle without you being there. This is a great feature for people who are looking to reduce time and make their life simpler.

A ghost immobiliser is a new generation device that connects to your vehicles CAN data network and utilizes the buttons on the steering wheel and dashboard to program a unique PIN code. It is designed to blend into with the vehicle's design, as it doesn't emit any noise or LED indicator. It can be placed anywhere on your vehicle, without affecting the aesthetics.

This stealthy device is TASSA approved and can reduce your insurance costs. It has a tracking function that can locate your vehicle even if it's been stolen. This is particularly useful if have a costly or rare vehicle that you've invested lots of time personalising.

Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your vehicle in the event that you've forgotten your PIN number or are not able to enter your vehicle. This feature is ideal when you need to run errands or drop off your kids and do not want to risk having someone else drive your vehicle. This feature is useful if you have to take your vehicle in to be repaired or serviced.

Another benefit of the Ghost is that it does not transmit or detect radio frequency signals, which makes it unnoticeable to thieves who use RF scanning or code grabbing technology. It is also able to protect your car against key cloning and ECU swapping as well as other the most common methods used to steal cars.

There is no key to cloning

Ghost immobilisers are an excellent option to protect high-end automobiles and are designed to block key replication. They stop your car from starting until an additional PIN code is entered in conjunction with the regular key fob. This makes it very difficult for thieves to steal the vehicle, and may even stop them from trying. This is a particularly good option if you've invested lots of time and money making your vehicle unique or own a unique or expensive model.

These immobilisers are connected to the vehicle's CAN network and are completely concealed, which means that their presence isn't visible. The device is also difficult to detect by using radio frequency scanning technology or code grabbing. This means that a criminal must spend much longer to take your vehicle.

A thief will need to be aware of the unique pin sequence and the location of the ghost in order to avoid it. The pin code is exclusive to you and you can change it as many times as you need to. The pin you select is simple to remember, but mathematically impossible for anyone else to decipher. In addition the engineer will have provided you with an emergency PIN code override in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It works with any vehicle and can be fully customized to match your vehicle's look. It is also affordable and simple to use. The device can be transferred to another vehicle, as long as it is compatible with the new vehicle.

The immobiliser for the CAN bus is compatible with many other security features. For instance, it could detect the damage to your vehicle and warn the owner. It also can stop the engine in the event that the car is tampered with. It also helps protect your vehicle from key cloning and hacking. It can also detect vibrations or contact with the vehicle. It can also notify the owner when the vehicle is moved.

No OBD port hacking

Ghost employs a hidden immobiliser module connected to your vehicle's CAN data network which stops thieves from gaining access to your vehicle to disable the alarm, turn off the key fob, and then code new keys. This technology is an improvement over the old methods used by thieves to steal vehicles in the past. The CAN data network also means that the system won't be affected by disconnecting or replacing your battery.

The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that protects against hacking, key-cloning and theft of replica cars. It does not use LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console and door panels.

Modern thieves can utilize diagnostics to identify circuit breaks on your vehicle. They can bypass immobilisers that require a lot wiring or are integrated in the wiring. The Ghost is weatherproof and does not require any additional wiring. It what is ghost immobiliser not identified by diagnostic tools that are professional. It can be even installed on vehicles that are fitted with anti-theft systems.

Another benefit of the Ghost 2 immobiliser immobiliser is that your vehicle can only be started by someone who has access to the PIN number and has physical access to your vehicle. This is a significant advantage over traditional security systems that are able to be bypassed using cable alteration, a screwdriver or a universal remote controller.

If you forget your PIN you can reset it with the emergency PIN override function on a mobile phone or computer. This is helpful when you want to start your car after it's in a garage or at a valet parking service.

The Autowatch Ghost 2 is the latest version of the product, and is approved for insurance by TASSA when installed by one of our authorized installers. It has a QR fingerprint system for individual parts to be identified, which will allow the return of stolen parts in the event of their being found, and it can be switched into 'service mode' which allows the engine to start when your vehicle is in a garage or with valet parking, but you must enter your PIN code to get out of the car.